PRODUCT
The company has always adhered to the people-oriented, technology-first, market-oriented business philosophy, high standards and strict requirements to ensure the quality of its products.
Find the product you need / contact number: +8613373200335
Product Center
Contact Us
Contact: acting manager
Tel/Whatsapp/Sksype :+8615610899765
Emait: zf1563104555@163.com
Official website: www.zhufengdianlan.cn
Address: North side of Industrial Park, Daming County, Handan City, Hebei Province
Aluminum Conductors Steel Reinforced(ACSR)
ACSR is made of twisted aluminum wire and steel wire, suitable for overhead transmission lines.
The inside of it is a steel core, and the outside is twisted with aluminum wires around the steel core; the steel core mainly plays the role of increasing the strength, and the aluminum stranded wire mainly plays the role of transmitting electric energy.
Steel-cored aluminum stranded wire, LGJ, has the advantages of simple structure, convenient erection and maintenance, low line cost, large transmission capacity, and is conducive to the laying of special geographical conditions such as across rivers and valleys, and has good electrical conductivity and sufficient mechanical strength. It has the characteristics of high tensile strength and the distance between the tower and pole can be enlarged. Therefore, it is widely used in overhead transmission and distribution lines of various voltage levels.
Product model: JKLV, JKLYJ, JKLGYJ
Number of cable cores: single core
Conductor cross section: 10-630mm2
Conductor material: aluminum core, steel core
Sheath material: anti-aging polyethylene insulation
Rated voltage: 1KV, 10KV, 35KV
Executive standard: GB/T1179-2020
Working temperature: The maximum working temperature of PVC and polyethylene insulation does not exceed 70°C, and XLPE insulation does not exceed 90°C; when short-circuited, the maximum temperature of the cable conductor, PVC insulation does not exceed 160°C, and polyethylene insulation does not exceed 160°C. Exceeding 150°C, cross-linked polyethylene insulation shall not exceed 250°C, and the duration shall not exceed 5S.
Bending radius: 1) Cables with a rated voltage below 1KV: if the outer diameter (D) of the cable is less than 25mm, it should not be less than 4D, and if the outer diameter (D) of the cable is 25mm or above, it should not be less than 6D; Should not be less than 20(D+d). In the formula: D— the actual outer diameter of the cable, d— the actual outer diameter of the cable conductor.
Zhufeng Cable Daming Co., Ltd.
Service Hotline:
Production base:
North side of Industrial Park, Daming County, Handan City, Hebei Province
All rights reserved: Zhufeng Cable Daming Co., Ltd. 冀ICP备18014766号 Poweredby:300.cn